Modem PRO 3.0 creates software virtual IP-modems and maps them to virtual serial ports in Windows OS. The product was developed to emulate standard hardware modems. New feature of Virtual Modem PRO enables not only to fully emulate Fax Class 1 modems, but also send faxes to any place on the Internet using virtual modems. All major software fax applications are supported (Microsoft Fax/Ventafax/SnappyFax 2000/Mighty Fax). So you may set up and use

emulate fax class 1 modem, ememulate modem, modem registers, hayes at commnds, virtual modem, modem over tcp ip, modem over network, software modem

TCP/IP network. In this way you can emulate virtual null-modem cable connection. Serial to Ethernet Connector allows you to customize remote serial port settings locally or dynamically fetch these settings from the remote end. Second type is the port-to-TCP client, which allows you to connect to remote server and send/receive communication serial data over TCP/IP network. Once connection is established, all data sent from remote serial port device

serial port to tcp, serial over ethernet, virtual null modem, com port to tcp server, port to port connection, share serial port over tcp ip

ITU-T X.25 Protocol Module (with RFC1613 XOT) - C Source Library (supplied with full source code) implements ITU-T recommendation X.25 - Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for terminals operating in the packet mode. HS X.25 includes HsDL (Data Link with RFC1613 Cisco Mode XOT) and HsSock (Winsock interface) for X.25 over TCP applications

x 25 protocol, rfc1613, x 25 source, itu t x 25, x 25 over tcp, x 25, cisco xot, legacy, x 25 over ip, legacy migration

over TCP/IP network turning your computer into low-cost terminal server. As the result, any serial port device connected to COM port could be accessed from anywhere in the world as if it is attached to local PC. When the attached serial port device sends communication data it will be actually transmitted over TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In that case

serial over network, serial to ethernet, serial over tcp ip network, create com port, serial port connector, ethernet connector, serial over ethernet, virtual serial server, share serial port

modem cable on computers located in a TCP/IP LAN or connected to the Internet. In other words, with VSPD Net you can create any number of pure virtual serial ports in your system, which will be connected over TCP/IP network to another computer via virtual null-modem cable. Real serial ports will not be occupied. Example: You have two computers, host1 and host2 for example, connected with TCP/IP networking. You can create virtual serial port COM5

virtual null modem connection, virtual serial driver, network, virtual serial port, create virtual serial ports, network virtual serial port, virtual null modem cable, internet, virtual serial port driver, serial, tcp ip lan, virtual, ports

modem and VPN over TCP/IP connection - Traffic accounting for each client of the local net - Http, ftp, https-proxy, port-mapping support - Black list of clients and limit proxy traffic support - Chat and file transfer support - Synchronization of system time on a client PC and server PC over Internet - Blocking of connection by a client or by the server - Encrypting of data transfered between the server and the clients - Accounting of Internet expenses

remote modem control, traffic analyze